PneuTorque PTM-72 Series
PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.
Fast - 1000 Nm version has a free speed of 140 rpm for rapid bolt run-down. Light weight - single direction 2000 Nm stall tool weighs just 6.2 kg. Less than 85 dB(A) when under load. Non impacting - low vibration levels make these tools comfortable and safe to use.
Quick and easy to replace the square drive. Socket location is aided by the 'Soft Start' trigger control and allows gradual and safe reaction location.Gearbox can rotate independently from the handle for safety, so that reaction forces are not transmitted back to the operator. Dual trigger versions reduce the risk of the operator's hands becoming trapped between the reaction bar and reaction point.
Bi-Directional models can also be supplied as Shut-Off versions, with either Internal or External control, with minimum impact on the overall tool size and weight, meaning that a repeatability of +/-2% can be guaranteed.)
)
)
)
)
)
)
)
)